background image

USB Stereo Turntable System

2

Introduction 

Thank you for purchasing the AT-LP60-USB. Audio-Technica brings its 

legendary quality and audio fidelity to the digital realm with this LP-to-

Digital Recording System. In the box, you’ll find everything you need 

to transfer your classic LP collection to digital files: Audio-Technica’s 

AT-LP60-USB stereo turntable, complete with USB output that allows 

direct connection to your computer; Audacity recording software (for 

MAC or PC); an integral dual-magnet Audio-Technica phono cartridge; 

a USB cable and adapter cables. The turntable also offers a built-in 

switchable phono/line preamp that allows connection to a stereo 

system equipped with either a phono or line-level input.
AT-LP60-USB stereo turntable features: 

•  USB output –no special drivers required for direct connection  

  to your computer
•  Built-in switchable stereo phono/line level pre-amplifier. Permits use  

  of turntable with stereo systems having either magnetic-phono inputs  

  or “AUX” (line-level) inputs; also allows convenient use of turntable  

  with most powered speakers
•  PC & Mac compatible
•  Fully automatic operation
•  Two speeds: 33 

1

/

3

 RPM and 45 RPM

•  Professional aluminum turntable platter
•  Integral Audio-Technica Dual Magnet

 phono cartridge with 

  replaceable diamond stylus
•  Damped lift/cueing mechanism with front-panel control
•  Removable dust cover

To assure maximum satisfaction from this product, please read the 

information and follow the instructions presented in this manual. Please 

keep the manual in an accessible location for future reference.
We suggest that you save all the packaging materials for possible future 

storage, moving or shipping.

CAUTION: To avoid stylus damage, make certain the  

included stylus guard is in place whenever the turntable  

is being installed, moved or cleaned.

Stylus assembly

Stylus (“Needle”)

Stylus guard

Safety instructions 

1.  Read these instructions.

2.  Keep these instructions.

3.  Heed all warnings.

4.  Follow all instructions.

5.  Do not use this apparatus near water.

6.  Clean only with a dry cloth.

7.  Do not block any of the ventilation openings. Install in accordance

 

with the manufacturer’s instructions.

8.  Do not install near any heat sources such as radiators, heat registers,

 

stoves, or other apparatus (including amplifiers) that produce heat.

9.  Do not defeat the safety purpose of the polarized or grounding

 

plug. A polarized plug has two blades with one wider than the other.

 

A grounding plug has two blades and a third grounding prong. The

 

wide blade or the third prong is provided for your safety. If the

 

provided plug does not fit into your outlet, consult an electrician for

 

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly

 

at plugs, convenience receptacles, and the point where they exit

 

from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket or table specified by

 

the manufacturer, or sold with the apparatus. When a cart is used,

 

use caution when moving the cart/apparatus combination to avoid

 

injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for

 

long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is

 

required when the apparatus has been damaged in any way, such

 

as power-supply cord or plug is damaged, liquid has been spilled or

 

objects have fallen into the apparatus, the apparatus has been

 

exposed to rain or moisture, does not operate normally, or has

 

been dropped. 

15. Where a mains plug is used as the disconnect device, the

 

disconnect device shall remain readily operable.

16. Please keep the unit in a good ventilation environment.

17. Apparatus shall not be exposed to dripping or splashing and

 

no objects filled with liquids, such as vases, shall be placed  

 

on apparatus.

 

 

Caution: 

To reduce the risk of fire or electric shock, do not expose 

this apparatus to rain or moisture. The apparatus shall not be 

exposed to dripping or splashing, and no objects filled with liquids, 

such as vases, shall be placed on the apparatus.

Warning: 

To reduce the risk of fire or electric shock, do not 

expose this apparatus to rain or moisture. The apparatus shall not 

be exposed to dripping or splashing and that no objects filled with 

liquids, such as vases, shall be placed on the apparatus.

Caution: 

To prevent electric shock, do not use this polarized plug 

with an extension cord, receptacle or other outlet unless the blades 

can be fully inserted to prevent blade exposure.

The lightning flash with arrowhead symbol within the 

equilateral triangle is intended to alert the use to the 

presence of uninsulated “dangerous voltage” within 

the product’s enclosure that may be of sufficient 

magnitude to constitute a risk of electric shock.

The exclamation point within the equilateral triangle is 

intended to alert the user to the presence of important 

operation and maintenance (servicing) instructions in 

the literature accompanying this appliance.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Summary of Contents for AT-LP60-USB

























Reviews: