WD752-BD-N
150Mbps Wireless Lite N USB Adapter
- 31 -
Interval value determines the time interval of the beacons. The default value is 100.
TX Power -
Manually force the AP’s transmitting power. System default is 100%.
Idle Time -
Manually force the Idle Time using a selected value. The default is 300.
4.3 Access Control List
Click the
Access Control
List
icon
of the utility and the
Access Control List
screen will
appear as Figure 4-9. In this page, you can enable/disable the AP to connect with the specified
Mac address. Click
Allow All
, and enter the Mac address allowed to connect to your AP in the
empty field beside
MAC Address
, and then click
to add it to the list, shown in Figure 4-10.
Highlight an existing Mac address in the list and click
to remove it from the list as shown in
Figure 4-11. When clicking
, you will clear all the Mac addresses in the Access Control List as
Figure 4-9 Access Control Function
Access Policy -
This field allows you to start the function or not. System default is disabled.
Disable -
Disable the Access Policy feature.
Allow All -
Allow all the MAC addresses in the Access List to access the AP.
Reject All -
Disable all the MAC addresses in the Access List to access the AP.
Mac Address -
Manually force the Mac address using the function.
Apply -
Click to make the settings take effect.