WD752-BD-N
150Mbps Wireless Lite N USB Adapter
- 28 -
Chapter 4 AP Mode
Right click the icon
to switch to AP Mode. In this mode you can use the WD752-BD-N as a
soft AP.
Figure 4-1
Note:
At this time, if your PC has Installed other network card (wireless or wired), you will be prompted
“ICS Select WAN Adapter” to select one of them to be “WAN”. With this function WD752-BD-N
can serve as wireless router based on the selected card connecting to the Internet, which will
make the APs of the LAN share the Internet.
Figure 4-2
The configuration utility screen will then appear as shown in the figure below. By clicking the
corresponding icon, you can configure the AP, make some advanced settings and view the AP
’s
status. The tools section shown in the following figure respectively stands for
Config AP
,
Advanced
,
Access Control List
,
Associate List
and
About
from the left to the
right .
Figure 4-3
