WD752-BD-N
150Mbps Wireless Lite N USB Adapter
- 14 -
Figure 3-7 Use Pre-logon Connection
Use Pre-logon Connection -
Use ID and Password in Profile.
5. Some advanced settings can be made in Figure 3-8.
Figure 3-8 Profile
Tx Power -
Manually force the AP’s transmitting power.
Use RTS Threshold -
Here you can specify the RTS (Request to Send) Threshold. If you are
not sure, please leave it default here.
Use Fragment Threshold -
This value is the maximum size determining whether packets will
be fragmented. Setting the Fragment Threshold too low may result in poor network
performance because of excessive packages. You are recommended to leave it default if you
are not sure about it.
6. Click the
Active
icon
in the screen below to connect to the chosen network. When the
screen looks like below, it shows that you have successfully added a new profile and
connected to the wireless network.
