Page 63
Volume Setups
Once all of the system features have been set, you can proceed to set volume related features on the
Cinema Reference Mach II. The order for these settings is specific. Follow the steps below in order to
best setup the Cinema Reference Mach II.
Storing Volume Presets
The Cinema Reference Mach II features four volume presets. These are easily stored and can be
used to quickly recall different volume levels depending on how loud you want the system to play. One
way to recall a Volume preset is to set a one of the four Volume Presets as the Turn On Volume Level.
Whenever the Cinema Reference is turned on, this Volume Preset will be recalled. Volume Presets 1
and 2 can be easily recalled under the Channel. All volume presets can be recalled in a slightly more
involved manner, also under the channel. All four volume presets can also be programmed into a
remote control or control system for one button recall.
1
To store a Volume Preset, first engage the system to a playing input and adjust the volume
using the Master Volume Control.
2
Turn the Channel knob clockwise until the display reads RECALL/STORE VOL PRESETS and
press the Channel knob.
3
Turn the Channel knob clockwise until the display’s top line reads STORE while the second
line reads the VOL PRESET number you wish to store the volume level on and press the
Channel knob.
4
Turn the Volume knob to exit this setup menu.
At this time you have stored a Volume Preset. You can now repeat these steps for other Volume
Presets.
Recalling Volume Presets
To recall Volume Presets 1 or 2:
1
Turn the Channel knob until the display reads PUSH RECALLS VOL PRESET 1 or PUSH
RECALLS VOL PRESET 2 and press the Channel knob.
To recall any Volume Preset:
1
Turn the Channel knob until the display reads RECALL/STORE VOL PRESETS and press the
Channel knob.
2
Turn the Channel knob clockwise until the display’s top line reads RECALL while the second
line reads the VOL PRESET number you wish to recall and press the Channel knob.
Turn-On Volume Level Setup
The Cinema Reference features a Turn-On Volume Level which is engaged every time the Cinema
Reference is first turned on. The Turn-On Volume level is based on one of the four Volume Presets.
You can also opt to use the alternate setting, Last Used, which is also the Out of the Box setting. To
change the Turn On Volume from Last Used to a specific Volume Preset level:
1
Turn the Mode knob clockwise until the display’s second line reads SETUP MENU and then
press the Mode knob.
