Audio Control D4600, User Manual

Page: 7 / 10

Audio Control M6400 / M4800 / D4600
Crestron Driver User Guide
6
VolumeSet INPUT
Set the zone volume level. Valid range 0d to
100d.
BassSet INPUT
Set the zone bass level. Valid range 0d (-10) to
20d (+10). A value of 10d is equivalent to 0
cut/boost or flat response.
TrebleSet INPUT
Set the zone treble level. Valid range 0d (-10) to
20d (+10). A value of 10d is equivalent to 0
cut/boost or flat response.
Zone PARAMETER
The zone that this module is controlling. This
must match ZoneCommsRx.
ZoneCommsTx OUTPUT Links to ZoneCommsRx on the Comms module.
PowerIsOn OUTPUT Indicates zone is enabled.
PowerIsOff OUTPUT Indicates zone is disabled.
IsMuted OUTPUT Indicates zone is muted.
IsUnmuted OUTPUT Indicates zone is unmuted.
LoudnessIsOn OUTPUT Indicates zone loudness is enabled.
LoudnessIsOff OUTPUT Indicates zone loudness is disabled.
CurrentSource OUTPUT Indicates currently selected source. (see
SourceSelect for value range).
CurrentVolume OUTPUT
Indicates currently set volume. (see VolumeSet
for value range).
CurrentBass OUTPUT
Indicates currently set bass. (see BassSet for
value range).
CurrentTreble OUTPUT
Indicates currently set treble. (see TrebleSet for
value range).
CurrentSource OUTPUT Indicates currently selected source. (see
SourceSelect for value range).
AudioControl_ ZoneDigital _VX_XX.umc
Signal Name Type Description
ZoneCommsRx INPUT
Signal FROM AudioControl_{Model}_Comms.umc
(Zone1CommsTx - Zone8CommsTx). This signal
must match the Zone parameter. Example: If
'Zone3CommsTx' is connected, Zone must be set
to 'Zone 3'.
PowerOn INPUT Enable zone output.
PowerOff INPUT Disable zone output.
SourceSelect INPUT Select the zone source. Valid range 1d to 15d.
M-Series
1. Analogue Channel 1-2
2. Analogue Channel 3-4
3. Analogue Channel 5-6
4. Analogue Channel 7-8
5. Analogue Channel 9-10
6. Analogue Channel 11-12
7. Analogue Channel 13-14
8. Analogue Channel 15-16
9. Digital A
10. Digital B