Audio Control M6400 / M4800 / D4600
Crestron Driver User Guide
9
Grouping
When setting up groups, there is an option to lock the groups on the zone configuration
page:
It is recommended that you
do not use this feature
. If a group is locked and the
group
/- buttons are pressed, the device will only change the volume for the first zone in
the group. If a group is locked and the
zone
/- buttons are pressed, the device will
change the volume for all grouped zones but will only feed back that the zone pressed has
changed.
Consequently, best practice for using this driver’s grouping feature are as follows:
If zones are grouped:
Only expose the group commands to the user (volume, bass, treble, switch, etc.) and
do not
lock the groups
.
If zones are not grouped:
Only expose the zone commands to the user for those specific zones.
