Audio Control M6400 / M4800 / D4600
Crestron Driver User Guide
5
AudioControl ZoneAnalogue_VX_XX.umc
Signal Name
Type
Description
ZoneCommsRx
INPUT
Signal
FROM
AudioControl_{Module}_Comms.umc This signal
must match the Zone parameter. Example: If
'Zone3CommsTx' is connected, Zone must be set
to 'Zone 3'.
VolumeUp
INPUT
Pulse to nudge volume up by 1 value. Hold to
ramp volume up.
VolumeDown
INPUT
Pulse to nudge volume down by 1 value. Hold to
ramp volume down.
Mute
INPUT
Pulse to mute zone.
Unmute
INPUT
Pulse to unmute zone.
MuteToggle
INPUT
Pulse to toggle current mute state.
BassUp
INPUT
Pulse to nudge Bass up by 1 value.
BassDown
INPUT
Pulse to nudge Bass down by 1 value.
TrebleUp
INPUT
Pulse to nudge Treble up by 1 value. Hold to
ramp Treble up.
TrebleDown
INPUT
Pulse to nudge Treble down by 1 value. Hold to
ramp Treble down.
PowerOn
INPUT
Enable zone output.
PowerOff
INPUT
Disable zone output.
LoudnessOn
INPUT
Enable zone loudness setting. This will override
zone Bass/Treble settings.
LoudnessOff
INPUT
Disable zone loudness setting. This will override
zone Bass/Treble settings.
SourceSelect
INPUT
Select the zone source. Valid range 1d to 15d.
M-Series
1. Analogue Channel 1-2
2. Analogue Channel 3-4
3. Analogue Channel 5-6
4. Analogue Channel 7-8
5. Analogue Channel 9-10
6. Analogue Channel 11-12
7. Analogue Channel 13-14
8. Analogue Channel 15-16
9. Digital A
10. Digital B
11. Digital C (M4800 only)
12. Digital D (M4800 only)
D-Series
13. Bus A
14. Bus B
15. Local
