Audio Authority Access EZ 922, System Installation Manual

Page: 45 / 52

45
Audio Authority Tech Support USA and Canada: 800-322-8346 (Mon-Fri 8:30 AM to 5:00 PM Eastern Time)
Phone: 859-233-4599 Fax: 859-233-4510 Hookup drawings and FAQ audioauthority.com/access_tips
TECH TIPS
SYSTEM
BUS
MODULE ID
GROUP
( + – )
FRONT, REAR, SUB, ETC:
10-19
0-9
POWER
Model 932
ASD
SPEAKERS
SPEAKER
BUS
PSB
LEFT RIGHT
8 7 6 5 4 3 2 1
701-1090
Speaker Selector
SYSTEM
BUS
MODULE ID
GROUP
( + – )
FRONT, REAR, SUB, ETC:
10-19
0-9
POWER
Model 932
ASD
SPEAKERS
SPEAKER
BUS
PSB
LEFT RIGHT
8 7 6 5 4 3 2 1
701-1090
Speaker Selector
0
123
4
5
6
7 8 9
0
1
23 4
5
6
7 8 9
0
123
4
5
6
7 8 9
0
123
4
5
6
7 8 9
+ – + –
3
7 8
3
7 8
System Bus
Connections
Settings for
Module
as Left Channel
Module
Address
Settings
Speaker Bus
Connections
Left Speaker
Position #8
Settings for
Module as
Right Channel
Connectors are
removable for
service.
Left & Right Speakers
Model 932 Speaker Modules can be configured to function as left, right or mono modules. The slide switch on the bottom
left side of the module is marked ”Left-Right.” Position the switch to ”Left” for left channel function and ”Right” for either
right channel or mono function (if used for mono operation there will not be a corresponding “L” module.)
932 modules in the Front Speaker Product Group are unique in the fact that they share the same Group Address with the
receiver group. For example, if the Receiver Product Group number is “4”, then the Front Speaker Group number would
also be “4”. All other speaker groups should have a higher Group address.
Left and Right modules have the same Module ID (e.g. for front speakers 1-8 both Left & Right modules would be
addressed: Module ID= “0-9” on the slide switch, and “0” on the rotary switch; Group= 4.
The next module pair for front speakers 9-16 both Left & Right modules would be addressed: Module ID= “0-9” on the slide
switch, and “1” on the rotary switch; Group= 4, etc.)
Right Speaker
Position #8
Write in the
Speaker Group
Name
Write in each
Speaker’s
number (e.g.
16 or 24)
Write in the
Product
Group and
Module ID
settings
*Product Select
Button
*Product Select
Button
Write in the
Speaker Group
Name
Wire Color Code
Green L+ Brown R+
White L– Gray R–
*2-wire or 4-wire PSBs may be used.
See page 25 for more information