Audility Europe TOPIC 2004, Instruction Manual, Page: 6 / 8

- 5 -
6. REMOTE CONTROL
When the answering machine is turned ON (ANS LED is on) and in OGM1
mode, the caller can activate the remote control function, after hearing the
“beep”, by entering the 3 digits of the remote control code. The machine will
turn in waiting state, enter the operation code within eight seconds or the
machine will automatically disconnect the line.
1. Operating the Recordings
Press “10” to play the new messages in the public mailbox.
Press “11” to play the new messages in the private mailbox1.
Press “12” to play the new messages in the private mailbox2.
Press “20” to play all messages in the public mailbox.
Press “21” to play all messages in the private mailbox1.
Press “22” to play all messages in the private mailbox2.
Press “6” to skip to the next message.
Press “4” to repeat the previous message.
Press “5” to repeat the present message.
Press “3” to erase the present message.
During the playing of a recorded message, press “
∗
” to insert a pause and
hit the key again to continue the playing.
Press “#” to stop the playing and return to the remote control waiting state.
When the playing is finished and no keys are pressed within 8 seconds the
machine will hang up automatically.
Press “#” to stop or hang up the phone.
2. Erasing Messages
Press “30” to erase all messages in the public mailbox.
Press “31” to erase all messages in the private mailbox1.
Press “32” to erase all messages in the private mailbox2.
3. OGM Recording
Press “7” to record a new outgoing message.
Hearing a “beep”, you can record a new OGM through your phone, press “#”
to stop. The maximum length of the OGM is two minutes; the recording will
stop automatically when the time is up. When the recording is done, the
answering machine will play once the new recorded OGM.
4. Monitoring Mode
Press “8” to enter the monitoring mode. The caller will hear all noises nearby
the answering machine, press “
∗
” within 30 seconds, to prolong the
monitoring time for another 30 seconds.
5. Select ANSWER ON/OFF mode
Press “9” to select ANSWER ON/OFF mode