- 2 -
3. INSTALLATION
1. Install four batteries (not included) 1.5V size AAA into the battery
compartment and check if they are placed in the right polarity before
closing the lid of battery compartment. Do not mix old with new
batteries or Alkaline with Rechargeable batteries.
2. Connect the line cord. Plug the line cord into the line socket at the
back of the machine and plug the other end of the line cord into the
modular wall jack.
3. Connect your telephone. Plug your telephone set cord into the
telephone socket at the back of the machine.
4. Connect the power cord. Plug the power transformer into an electrical
outlet that is not controlled by a wall switch.
4. SELF-CHECKING
Once the machine is connected to the power supply, the ANS LED starts
flashing and the machine enters the self-checking state. The self-checking
takes about 15 seconds, a “beep” will be heard and the ANS LED lights up.
When the battery level is too low (or no batteries into the compartment), the
BAT LED will be on.
5. OPERATION GUIDE
1. Setting the System Date and Time
Press the “REW” button to hear the current system date and time.
Keep pressing the “REW” button over 2 seconds and set the time.
The answering machine will say a weekday, adjust the day backwards by
pressing the “REW” button and forwards by pressing the “FFW” button,
confirm by pressing the “PLAY” button. Then, set the hour; use the “REW” or
“FFW” buttons to adjust and press “Play” to confirm the setting. Then, set the
minutes; use the “REW” or “FFW” buttons to adjust and press “PLAY” to
confirm the setting. The answering machine will return to waiting state after
saying the new set time.
During the setting, press the “ON/OFF” button to escape and cancel the
setting, the machine will keep the previous time setting.
2. Recording an outgoing message (OGM)
Press the “OGM” button to hear the current outgoing message.
Keep pressing the “OGM” button over 2 seconds and the ANS LED flashes.
When a “beep” is heard, speak loud into the microphone to record an OGM
and press the “ON/OFF” button at the end of the message. The maximum
recording time for an OGM is two minutes, when going over, the recording
will stop automatically.