21
Operation with Logic Pro
With iD4 plugged into your Mac, launch
Logic Pro and ensure that iD4 is selected
as your Input and Output Device:
Logic Pro > Preferences > Audio
Once iD4 is selected as your device, set the
appropriate buffer size for your session.
If you are using the Monitor Mix knob to
monitor your inputs, you can set the buffer
size reasonably high to reduce the strain
on your computer. If you are experiencing
issues with playback stability or “overload”
errors coming up, try increasing the buffer
size.
If you are opening an existing session, iD4’s
sample rate will automatically change to
match the project. If you are starting a new
session, be sure to select the appropriate
sample rate found in:
File > Project Settings > Audio
If you are monitoring your input signal on
iD4, disable Logic’s software monitoring to
avoid hearing duplicate signals as this can
be very off-putting.
Logic Pro > Preferences > Audio > General >
Software Monitoring
IMAGE
LOGIC PRO SETUP
Summary of Contents for iD4
