Audi RNS-E, Operating Instructions Manual, Page: 132 / 194

Navigation (NAV) 127
General operation RADIO, CD NAME, TEL NAV, INFO CAR, SETUP
– In a destination input menu
Þ
page 117, fig.121, enter
another Region as applicable.
– Select Special destination
Þ
page 117, fig.121.
– Select Find entry
Þ
page 126, fig.131 and enter the
name using the speller, or
– Select Telephone number, In immediate vicinity, In
vicinity of destination, Along the route or Regionwide.
– Select a subcategory or enter additional data for the
special destination.
– Select Set as destination. The special destination is auto-
matically transferred to the route guidance.
– Geben Sie ggf. Enter stopovers for route guidance with
stopovers
Þ
page 139.
– Select Start route guidance
Þ
page 129.
The special destinations stored on the navigation DVD (e.g. airports,
gas stations, etc.) can be selected.
Using the Find entry, you can input the name of the special destina-
tion with the speller.
When you confirm a selected special destination, it becomes the
new destination.
Selection “Telephone number”
When telephone number for the special destinations are stored on
the navigation DVD, you can enter these special destinations by the
telephone number.
Selection “In immediate vicinity”
This special destination
Þ
page 126, fig.132 refers to the area
immediately surrounding the current vehicle position.
This function is especially useful for planning stopovers, for
example to find the nearest restaurant.
The list of special destinations displayed is sorted in ascending
order according to distance (as the crow flies) to your location. The
distance displayed for special destinations can differ considerably
from the driving distance.
Selection “In vicinity of destination”
After a destination has been entered in a menu for destination
input, a special destination can be in the vicinity of the destination.
If no destination has been entered in the destination input menu,
this function is greyed out.
This special destination refers to a final destination already calcu-
lated and is useful, for example, when you are looking for a gas
station at your destination.
Selection “Along the route”
This special destination refers to route calculation. Special destina-
tions “Along the route” can only be selected during active route
guidance.
It is particularly suitable for setting a specific special destination
along the calculated route. Only special destinations situated
directly on the route are located.
Selection “Region-wide”
This special destination is not assigned to any city or previously
selected destination. You will receive a list of all possible special
destinations in each country. For example, you can obtain a list of
the possible airports for the specified region.