Audi RNS-E, Operating Instructions Manual

Page: 126 / 194

Navigation (NAV) 121
General operation RADIO, CD NAME, TEL NAV, INFO CAR, SETUP
Entering Route plan (Route with stopover)
Up to three stopovers and a final destination can be set
in the Route plan.
Fig. 125 Navigation: Route plan
– Press the function button
Þ
page 16.
– Press the control button with the Route function and
confirm the Route with stopovers function to switch to
Route plan
Þ
fig.125.
– Select Destin. to enter the final destination.
– Select Region as applicable
Þ
page 118.
– Select City and enter the city using the speller, or
– In the speller display, select LIST and select the city from
the list.
– Select Select city center to navigate to the center of the
selected locality, or
– Select Input street name, Special destination in city or
Destination input on map to set more detailed destina-
tion criteria.
– Enter stopovers by means of Add stopover 1, Add
stopover 2 or Add stopover 3.
– Select Start route guidance
Þ
page 129.
After you have started route guidance, the calculated route plan
with all the various information is initially shown as an overview on
the map. Confirm route guidance by pressing the control knob. You
can find additional information about the route plan starting on
Þ
page 132.
Switch from the letter speller to the number speller to enter a city
with special characters (e.g. hyphen, apostrophe or period)
Þ
page 125.
Selection “Select city center”
The Navigation System calculates route guidance to the center of
the city entered.
Selection “Input street name”
By inputting the street in a city, you can specify the destination more
precisely.
After selecting the street, you can set more detailed destination
criteria by entering an Intersection or a Street number
Þ
page 128.
NAV