Audi 100 Quattro, Owner'S Manual

Page: 64 / 180

CONTROLS AND EQUIPMENT
LIGHT SWITCH / TURN SIGNAL / HEADLIGHT DIMMER SWITCH LEVER
62
When the ignition is switched on, the
headlights (low beam with reduced brightness)
and tail lights will automatically come on
A – Light switch
Switch positions:
0 – all lights off
1)
1 – all lights on, except headlights
2 – headlights (only with ignition on) and
all other lights on
To conserve battery power, the
headlights will go out automatically when
the ignition is turned off or while the
starter is engaged.
1)
Canada models:
Daylight driving lights
B – Turn signal / headlight dimmer
switch lever
With ignition on:
Turn signals
Lever up – right turn signals
Lever down – left turn signals
The turn signal indicator light flashes
when you operate the lever.
The turn signals are cancelled
automatically when you have completed
a turn (like driving around a corner), and
the steering wheel returns to the straight-
ahead position.
If a turn signal fails, the indicator light
flashes about twice as fast. A light bulb
may have to be replaced.
Lane changer
To indicate your intention when changing
lanes on expressways, slightly move the
lever up or down just to the point of
resistance -the indicator light must also
flash at the same time. The lever will
return to the OFF position when
released.
Headlight dimmer
With headlights on (lever A in position 2),
you can switch to high beam, low beam
or flash signal other motorists by
operating long lever as follows:
Low beam – lever in center position
High beam – lever pushed forward
Flashing
– lever pulled toward
steering wheel
When high beams are on, the blue
indicator light lights up.
Headlight flasher
With headlights on or off, you can signal
other motorists with headlight beam (in
lieu of horn), by repeatedly pulling the
lever just up to the point of resistance.