Audi 100 Quattro, Owner'S Manual

Page: 138 / 180

DO-IT-YOURSELF SERVICE
FUSES
Always heed WARNINGS on page 102.
136
A failure in the electrical system may be
caused by a blown fuse.
Fuses are arranged in one centralized
unit. The fuse/relay box is located under
er.
ing a fuse
ith the plastic
r spare fuses (A) of different
ratings are provided with the
y of spare fuses on hand. They are
e of higher amperage,
because this could damage the electrical
it. The cause of the short
nt should fuses be patched
e.
§
Reinstall fuse/relay box cover.
the engine hood. The fuses are protected
by a cov
Replac
Before replacing a fuse turn off all
lights and accessories and remove
the ignition key to avoid damaging the
electrical system.
§
To remove the fuse/relay box cover,
unhook both tongue latches on outside of
cover. See illustration.
A – spare fuses
B – additional fuses (number 23-30)
§
Consult the fuse listing on the
following page to find out which fuse
belongs to the component that has failed.
§
Remove blown fuse w
clip provided. This clip is located on the
fuse/relay box cover.
§
Fou
ampere
vehicle. It is good planning to keep a
suppl
available at your Audi dealer.
§
Replace the blown fuse, which can
be recognized by the burnt metal strip,
with a fuse of equal ampere rating.
Do not use a fus
part.
If a fuse blows repeatedly, do not keep
on replacing
circuit or overload must be found. On
no accou
up with tin foil or wire as this may
cause serious damage elsewhere in
the electrical circuit or cause a fir