AUDAC SourceCon MMP40, User Manual

Page: 9 / 20

9
Chapter 2
Overview MMP40
The MMP40 is a SourceCon™ compatible module featuring an (internal) board-edge
connector which carries all signals for getting it connected to any supporting main unit.
All external in & output connections shall be made using the available connectors on
the panel.
1) Balanced stereo line output:
The balanced stereo line output is implemented using two 3-pin terminal block
connectors. The audio output available on this connector allows it to be fed to any
amplifier or pre-amplifier.
2) Balanced stereo record input:
The balanced stereo line input (recording input) is implemented using two 3-pin terminal
block connectors. The line level audio signal coming from the audio source or pre-
amplifier shall be connected to this connector, allowing it being recorded.