AUDAC SourceCon MMP40, User Manual

Page: 10 / 20

10
Chapter 3
Using the MMP40
Since the MMP40 is a SourceCon™ module, it can be combined with a variation of
supporting main units. The operation and configuration interface might be different of
the unit where installed, however the offered functionality is identical. Some devices
will support control and configuration through a front panel graphical control interface
on a display, while others are also supporting web-control.
This manual describes the control configuration possibilities using front panel control. For
applications where more control possibilities are offered, check the instruction manual
of the used main device for more instructions.
Module screen
The module screen of the MMP40 gives an
overview of the current operation mode and can
be switched between media player mode and
media recorder mode. In media player mode,
the track position, track name and album cover
(if available) will be displayed on this screen.
In media recorder mode, the filesize of the
recorded track and length of the recorded track
are indicated.
The left section of the module screen includes 4 quick buttons which can be controlled
through the tactile buttons on the left screen side.
Switching between record or playback mode is done through rotating the selection dial
and selecting the (switch to media player) or (switch to media recorder) icons.
Track name
0:30 1:59
Media Player