AUDAC SourceCon MMP40, User Manual

Page: 12 / 20

12
Media player settings
The player settings menu for MMP40 is loaded when pressing the (settings) button
in player mode.
Output gain:
The gain can be adjusted within a range of +8
dB and -92 dB, allowing optimalization of the
output level according to the input sensitivity of
the connected amplifier or pre-amplifier. For
adjusting the output gain, rotate the function
dial until ‘Gain’ is highlighted and press it for
proceeding to the gain settings. The level can
be adjusted by rotating clockwise (volume up)
or counter-clockwise (volume down). Press the
rotary dial for confirming the currently set output
level.
Shuffle:
Random play mode (shuffle) can be switched On and Off. When switched On, all tracks
will be played in a randomized sequence. The MMP40 will select between all the tracks
available on the inserted media carrier including all sub-folders.
Toggle the shuffle mode by highlighting ‘Shuffle’ (navigate through rotary dial) and
pressing the rotary dial.
Repeat mode:
The repeat mode can be switched between ‘ Off’ , ‘ Repeat all ’, ‘ Repeat one ’ and ‘ Repeat
folder ’. When ‘ Repeat all ’ is enabled, all tracks on the inserted media carrier will be
played in sequential order and when the last track is played, it will restart automatically
with the first track. When selected ‘
Repeat one ’, the currently selected track will
continuously play in an endless loop. When selected ‘ Repeat folder ’, all tracks in the
same folder of the currently playing track will be played in a sequential order and when
the latest track inside this folder is played, it will automatically restart with the first
track in this folder.
Toggle between the various repeat modes by highlighting ‘Repeat mode’ (navigate through
rotary dial) and pressing the rotary dial.
Output gain
0dB
Shuffle
Repeat mode
Play mode
Back
MMP40 SETTINGS