AUDAC SourceCon MMP40, User Manual

Page: 14 / 20

14
Media recorder settings
The recorder settings menu for MMP40 is loaded when pressing the (settings) button
in recorder mode.
Filename:
The filename of the recorded tracks can be
configured in this screen. When selected, a
screen with keyboard overview allows to enter
the filename through using the rotary selection
dial. When entered, select ‘OK’ to confirm the
currently entered track name. ‘Delete’ removes
the latest entered character, while ‘Cancel’
brings you back to the settings overview screen
without any applied changes.
When making multiple recordings in a row, each audio recording will be stored as an
individual file (when the recording was stopped). When the filename is not changed in
between various recordings, the subsequent recordings will be indicated with a number
(e.g. recording(2).mp3) in the stored filename.
Filetype:
The filetype of the recordings can be selected between MP3, OGG Vorbis and Wav. Toggle
between the various recording filetypes by highlighting ‘Filetype’ (navigate through rotary
dial) and pressing the rotary dial.
Mono/stereo:
The recording for MP3 filetypes can be switched in various types of mono / stereo
modes, including ‘
Joint stereo ’, ‘ Dual stereo ’, ‘ Mono (left input) ’ and ‘ Mono mix ’.
Toggle between various recording modes by highlighting ‘Mono / stereo’ and (navigate
through rotary dial) and pressing the rotary dial.
Using ‘ Joint stereo ’ mode, the similarities and differences between both left and right
channels are individually encoded. This improves the compression efficiency at a slight
loss of separation.
Using ‘ Dual stereo ’, both left and right channels are individually encoded as completely
separate signals. Each channel uses half of the available bitrate, for example by a 128
kbit recording, each channel would take 64 kbit.
Filename
Filetype
Mono/stereo
MP3
OGG Vorbis
MMP40 RECORDER SETTINGS