9
Chapter 2
Overview FMP40
The FMP40 is a SourceCon™ compatible module featuring an (internal) board-edge
connector which carries all signals for getting it connected to any supporting main unit.
All external in & output connections shall be made using the available connectors on
the panel.
1) Balanced stereo line output:
The balanced stereo line output is implemented using two 3-pin terminal block
connectors. The audio output available on this connector allows it to be fed to any
amplifier or pre-amplifier.
2) Trigger contact inputs:
The 15 contact inputs are implemented through dual-row 8-pin terminal block
connectors. All of them are (software) configurable as NO (normal-open) or NC (normal-
closed) contacts allowing connection for any type of external trigger (switch, relay, ... ).
The contacts pinout is indicated in the above image, with in the bottom right corner the
‘C’ (common) terminal.
