AUDAC DW5065, User Manual & Installation Manual

Page: 13 / 28

13
Connecting
The DW5065 wall panels should be connected to the PI (Peripheral Interface) ports on the rear side of
the matrix system with an UTP CAT6 twisted pair cable. 10 PI ports are available (PI1 to PI10) where
8 of them support addidional digital audio inputs (PI1 to PI8). So make sure the DW5065 wall panels
are connected to PI ports ranging from 1 to 8. The two left PI ports PI9 and PI10 can only be used for
connecting digital control devices and do not support digital audio transfer.
The maximum cable length between the matrix system and the wall panel may not exceed 300
meters.
MATRIX PI Port PINOUT (RS485, Digital Audio, +24V DC):
Pin 1 White-Orange AUDIO TX A
Pin 2 Orange AUDIO TX B
Pin 3 White-Green +24V DC
Pin 4 Blue RS485 A
Pin 5 White-Blue RS485 B
Pin 6 Green GND
Pin 7 White-Brown AUDIO RX A
Pin 8 Brown AUDIO RX B