AUDAC DW5065, User Manual & Installation Manual

Page: 11 / 28

11
always starts with the letter “W”. When only one wall panel is connected, the most logical way is to
start with address “W001”, and increase the address number for every additional wall panel. (“W002”
for wall panel 2, “W003” for wall panel 3, ...)
After the desired address is selected, click the “Set Address” button. A message will start blinking on
all the DW5065 wall panels connected in your system. When the function selection dial on the wall
panel is pressed, the selected address will be assigned to the corresponding wall panel.
Now, the zones which should be controlled by means of the wall panels and the selectable inputs need
to be selected. This can be done in the user interface with the two dropdown lists. When the zone or
input is selected, it automatically appears inside the listbox. To remove a zone or input from the listbox,
select the desired zone or input in the listbox, and click the “Remove Zone” or “Remove Input” button.
Next to the listboxes are several selection & checkboxes shown whereby some presets / restrictions
can be made to the corresponding wall panel. After the settings are made, click the “Save to
Wallpanel” button on the bottom of the window, and your changes will be uploaded to the wall panel.
Your wallpanel is now ready for operation.