AUDAC DPA152, User Manual & Installation Manual

Page: 11 / 31

10
Output connections
The loudspeaker connections are performed in two different ways. Every channel has Speakon and
euro terminal block output connections. In this way, the connections can be always made on the
most simple way for every application.
The used Speakon connectors are 4-pole versions. At the contacts of
Speakon 1, are the output signals available for both output channels.
Co1 and -1 contain the signal for output Channel 1, while
co2 and -2 the signal contain for output Channel 2. The contacts
of Speakon 2 only contain the signals of Channel 2, which are available
on co1 and -1.
1) Stereo Mode:
Stereo mode will be the most commonly operation method for this amplifier. The
loudspeakers of each channel can be connected with a separate two-core
connection cable. (or one four-core connection cable, carrying both signals for
Channel 1 and Channel 2 when connecting by Speakon connectors.)
Depending of the most suitable solution, the loudspeakers can be connected by
both Speakon and Euro Terminal Block connectors. When connecting the
loudspeakers by Speakon connectors, the conductors should be connected to
ter1 and -1 of the connector and when connecting the loudspeakers by
means of the Euro Terminal Blocks, just connect the conductors to the + and –
terminals of the corresponding output channel.