AUDAC ANI22, Installation Manual

Page: 7 / 12

7
5.3. Fix the ANIxx main interface board into the amplifier by simply clicking it onto the
front display board using both snap-in spacers. Make sure the female pin-header on
the main interface board is well positioned and matching the male counterpart on the
front display board of the amplifier. Once positioned correctly, securing can be done by
putting the supplied washer and nut and tightening it.
Step 6:
Connect the cable from the ethernet connection board to the RJ45 jack on the main
interface board and position the cable as indicated in the below image. Correct positioning
of the cable is important to avoid touching heating amplifier parts and to avoid obstruction
of the internal air-flow of the device. The networking cable shall be fixed to the internal
provided tabs using the supplied cable tie’s.