1
Operation Instruction Manual
WS-1200CPH
Programmable Precision PID Temperature Controller
*
Version 1.5
Auber Instruments
5755 North Point Parkway, Suite 99
Alpharetta, GA 30022
770-569-8420
www.auberins.com
May, 2013
Introduction
Thank you for purchasing the Auber WS series temperature controller. We sincerely
appreciate your decision and trust that our machine will meet your expectations in both
the quality of the result and the value of our product. While we are delighted that you may
be anxious to operate the controller for your project, a few minutes of your time reading
through this manual will only serve to enhance your experience in the months and years
ahead. In particular, we would urge you to read through the safety warnings below.
Although this plug-and-play controller is very easy to operate, the process involves high
temperature and high wattage appliances and your safety is paramount.
SAFETY WARNINGS
This controller is designed only to be used with devices that have limited power
and their own thermal cut off protection, such as a thermostat or thermal fuse in
case of controller failure.
Do not place any objects on the top of controller surface which is used to vent
excess heat during its operation.
When opening the cover of a rice cooker or slow cooker that has been running for
extended period of time, the cover will carry a lot of condensation that can drip
everywhere. Avoid dripping the water over the controller.
The maximum electric current this controller can handle is 12 amperes. For 120
volt AC in US and Canada, this limits the heater power to1440 watts. In addition, if
the heater power is more than 1400 watts, the volume of the pot is also limited to
less than 10 gallons (or 38 liters). Due to its compact size and the splash proof
*
Patent pending
