12
Get
ting R
ead
y
Attaching au Nano IC Card 04
• When installing au Nano IC Card 04, be sure to use the
supplied IC Card Tray Ejecting Tool for URBANO V01
(sample).
1
Turn the power off and open the card slot
cover
2
Hook the IC Card Tray Ejecting Tool for
URBANO V01 (sample) on the edge of the
tray and pull it out
Tray
IC Card Tray Ejecting Tool for
URBANO V01 (sample)
3
Check the orientation of the notch of the au
Nano IC Card 04 and put it on the tray. Then
insert the tray straight into the au Nano IC
Card 04 slot (upper)
After the tray is inserted, hook the IC Card Tray
Ejecting Tool for URBANO V01 (sample) on the edge
of the tray and press it all the way.
• Take care so that the au Nano IC Card 04 does not
get over the edge of the tray. Do not apply excessive
force and insert it all the way straight into the slot. If
the tray does not fit into the slot, do not press it with
force. Pull the tray out and insert it again with the
front edge raised. If the au Nano IC Card 04 gets
over the tray, the product might not recognize the au
Nano IC Card 04.
4
Close the card slot cover
Notch
au Nano IC Card
04 slot (upper)
microSD memory
card slot (lower)
Edge of tray
