39
Get
ting R
ead
y
◎
Do not lose the au Nano IC Card (LTE) after it has been
removed.
Attaching au Nano IC Card (LTE)
Turn the power off and remove the battery
pack
(
▶
P. 38 "Removing the battery pack")
Hook the tab with your finger to pull the tray
straight out to the arrow position
Do not pull the tray beyond the grid-line printed on
the label. If you pull it that far, insert the tray straight
aligning the grid-line.
Tab
With the IC side of the au Nano IC Card (LTE)
facing up, put it on the tray and insert the
tray with the au Nano IC Card (LTE) all the
way into the slot
Check the orientation of the notch.
The proper position when the tray is pushed into the
end is where the edge of au Nano IC Card (LTE) is
shown a little.
Notch
Attach the battery pack/back cover (
▶
P. 37)
