38
Get
ting R
ead
y
◎
Be sure to check the au Nano IC Card (LTE) is certainly
attached and then attach the battery pack.
◎
Attaching incorrectly might cause damage of the battery
pack or back cover.
◎
When attaching the back cover, be careful not to get
the lift tab of the battery caught. Doing so might cause
ingress of water.
Removing the battery pack
Remove the back cover of the back side of
the product (
▶
P. 37)
Pull the lift tab to remove the battery pack
Lift tab
Battery pack
Attach the back cover (
▶
P. 37)
◎
To remove the battery pack, pull the lift tab upward. Lifting
up using other than the lift tab might cause damage the
main unit or connection part of the battery pack.
Attaching/Removing au Nano IC
Card (LTE)
Before attaching/removing
the au Nano IC Card (LTE),
make sure to turn the
product off and remove the
battery pack.
IC (metal) part
au Nano IC Card (LTE)
◎
Note the following points, otherwise handling the au Nano
IC Card (LTE) tray or the product may cause malfunction
or damage.
• Do not touch the IC (metal) part of the au Nano IC Card
(LTE) or the IC card terminal inside the product.
• Insert in the correct direction.
• Do not use force to attach or remove.
◎
Before removing au Nano IC Card (LTE), be sure to remove
a power plug of specified AC adapter etc. from the product.
◎
When the au Nano IC Card (LTE) is not attached properly
or the au Nano IC Card (LTE) is abnormal, an error
message appears.
