AU SCV32, Basic Manual, Page: 18 / 48

16
Safety Precautions Safety Precautions
■ Backup content on the product
• Please back up *1 important content recorded or downloaded
for the product to an outside source. Content recorded to
memory on the product sometimes disappears or is altered by
unexpected factors, such as static electricity or a fault, repair,
mishandling, etc.
■ Available security codes
The product has various security codes that you can use.
The available security codes are as follows. Do not forget
the various security codes that are set as they are
necessary for various operations and contracts.
Make sure to change the initial value to your own unique
number.
● Security code
Example of
usage
①To do remote operation of Voice mail and Call
forwarding services from a land-line phone
②To use Customer Service Center and to do various
inquiries, applications, and modifications on the au
homepage
Initial value
A four-digit number chosen by the customer and
noted on the application form
● Screen lock setting
Example of
usage To set and release the screen lock
Initial value Swipe
● PIN code
Example of
usage To prevent unauthorized use of the au Nano IC Card
04 by third parties
Initial value 1234
Make sure to change the initial value to your own unique
number.
● Lock No. (NFC/Osaifu-Keitai Lock)
Example of
usage To set the "NFC/Osaifu-Keitai Lock" setting
Initial value 1234
Make sure to change the initial value to your own unique
number.
■ PIN code
● PIN code
To prevent unauthorized use of the au Nano IC Card 04 by a
third party, you can set the product to require PIN code entry
every time the power is turned on. You also need to enter PIN
code when setting whether the PIN code entry is required.
If the PIN code is incorrectly entered three times
consecutively, the PIN code will be locked. Use the PUK
code to unlock the PIN code.
• PIN code is "1234" and PIN code entry was set to not be
required at the time of purchase. You can change PIN code to
any four- to Sixteen-digit number, and set the PIN code entry
to be required as necessary.
If you require a PIN code to be entered, make sure to change
the number to your own unique number.
● PUK code
In case the PIN code is locked, you can unlock it by entering
the PUK code.
• PUK code is an eight-digit number given at the time of
purchase, which is printed on the back side of the plastic card
where your au Nano IC Card 04 is attached.
• After entering the PUK code, you need to set a new PIN code.
• If the PUK code is incorrectly entered ten times consecutively,
contact an au shop, PiPit or the Customer Service Center.
• "PIN code" is not reset by initializing the product.