14
Safety Precautions
Safety Precautions
• Never use modified au phone. Use of a modified device
violates the Radio Law and the Telecommunications Business
Act.
This product is compliant with rules on the technical standard
conformance of specified wireless equipment based on the
Radio Law and rules on the technology regulatory compliance
of terminal device based on the Telecommunications Business
Act. As proof of this, the "Technical Conformity Mark " is
indicated in this product.
How to confirm: Home screen → [基本フォルダ (Basic folder)] →
[Settings] → [About device] → [Regulatory information].
If the screws of the product are removed and modifications
are made to the internal components, the certification of
conformity with technical regulations will become invalid.
Never use the product without the valid certification. Doing so
violates the Radio Law and the Telecommunications Business
Act.
• Take care not to place magnetized items such as magnetic
cards, speakers and TV sets near the product, as it might
cause malfunction. Putting a strong magnetism close to the
product might cause false operation.
• When you put the product in your pocket or bag, take care so
that the display does not come in contact with metal objects
or other hard objects, as it might cause scratching or damage.
• When suddenly brought into a warm place from a cold place,
or when in a humid location, or when used where temperature
suddenly changes (e.g. near the air discharge port of an air
conditioner), water droplets (i.e. condensation) sometimes are
formed inside the product. Note that when used under conditions
such as this, the humidity might cause corrosion or a fault.
• When wiping the display, wipe with a soft, dry cloth. Use of
a moistened cloth, glass cleaner or other similar liquid might
cause a fault.
• When connecting/disconnecting an external device to/from
the microUSB connection terminal or headset connection
terminal, make sure that the connector of the external device
is straight with the connector terminal.
• Note that applying unnecessary force with an external device
connected to the microUSB connection terminal or headset
connection terminal might cause damage.
• Insert only a microSD memory card into the memory card slot
on the product.
• Do not exert excessive force when attaching/removing a
microSD memory card. Doing so might injure your hands or
fingers.
• While writing/reading data to/from a microSD memory card, do
not subject the product to vibration or impact, or turn off the
power. Doing so might cause loss of data or a fault.
• Do not cover the proximity/light sensor with your finger or
put a sticker on it. Doing so may hinder it from detecting the
ambient brightness and functioning correctly.
• Do not put a sticker, etc., on the proximity/light sensor. Doing
so may cause the sensor to malfunction and make the display
always turned off while receiving a call or during a call.
■ Touch Panel
• Use your finger to operate the touch panel. Do not use ballpoint
pens, pencils or other sharp-pointed objects. Using such objects
does not only hinder correct operation of the touch panel, but
also might cause scratching or damage to the display.
• Do not put stickers or sheets (e.g. commercially available
protective films, peep prevention sheets) on the display. Doing
so might hinder correct operation of the touch panel.
• If the display surface is dirty or wet with sweat or water, it
may not function correctly. In such case, wipe the display
surface with a dry, soft cloth.
• When carrying the product in your pocket or bag, take care
not to put the touch panel close to metals or other conductive
materials, as it might cause false operation of the touch panel.
Summary of Contents for SCV32
Page 1: ...Basic Manual SCV32...