13
Safety Precautions
Safety Precautions
Handling precautions
These precautions are provided to prevent the product from
getting a malfunction and to ensure that performance can
be fully demonstrated. Thoroughly read these precautions
to ensure correct use.
■ Precautions common to the product, internal battery,
charging equipment, au Nano IC Card 04, peripheral
devices
• Do not apply excessive force to the product during use. Be
sure not to put the product into a tightly packed bag or place
a heavy object on the product in a bag. Sitting on the product
in your pocket might damage the display or internal circuit
board resulting in a malfunction. Keeping an external device
connected to the microUSB connection terminal or headset
connection terminal might damage the connector resulting in
a malfunction. Such damage and malfunction are not covered
by the warranty, even if there is no external damage.
• Do not use the product in extremely hot, cold or humid places.
(Use within an ambient temperature range of 5 ℃ to 35 ℃
and humidity range of 35% to 85%. Store within an ambient
temperature range of 0 ℃ to 45 ℃ .)
- charging equipment
- peripheral devices
• Do not use the product in places that have extremely hot or
low temperatures, or high humidity. (Use within an ambient
temperature range of 5 ℃ to 35 ℃ and a humidity range of
35% to 85%. However it can be provisionally used if it is
36 ℃ to 40 ℃, but be aware of low temperature burns if it is
used for prolonged periods of time. In addition, when storing
the product, store it within the ambient temperature range of
0 ℃ to 45 ℃.)
- Galaxy A8 main unit
- au Nano IC Card 04 (when attached to the Galaxy A8 main
unit)
• Do not use in places subject to lots of dust or vibration.
• Clean the connection terminals with dry cotton swabs,
etc. every now and then. Soiled terminals might cause
poor connection. Do not exert a strong force to clean the
connection terminals to prevent deformation.
• Clean the product with a soft dry cloth (such as the type used
for eyeglasses). Forceful rubbing with a dry cloth may scratch
the display. The display may be stained if splash or smear is
left attached to the surface. Wiping the product using alcohol,
thinner, benzine, detergent, etc. might erase the printing on
the outer casing or cause discoloration.
• Use as far away as possible from land-line phones, TVs,
radios, etc. Use nearby might affect them.
• The product may become warm while charging or during other
operations, depending on the situation, but this is not abnormal.
■ Main unit
• Do not forcefully press, tap or intentionally subject the display
to strong impact. Doing so might cause scratching or damage.
• Do not forcefully press your fingernails, sharp objects or hard
objects against keys or display surface. Doing so might cause
scratching or damage. The touch panel is designed to be
lightly touched by fingers. Do not apply strong pressure with
your fingers or sharp-pointed objects (such as fingernails,
ballpoint pens and pins) on the touch panel.
In the following cases, the product may not respond to
touching the touch panel, or errors in operation may occur.
- Operation with gloved hands
- Operation with fingernails
- Operation with a foreign object placed on the touch panel
- Operation with a protective sheet or sticker on the touch
panel
- Operation with water drops or dew condensation attached
on the display
- Operation with wet or sweaty fingers
Summary of Contents for SCV32
Page 1: ...Basic Manual SCV32...