16
Safety Precautions
Safety Precautions
• Clean the product with a soft dry cloth (such as the type used
for eyeglasses). Forceful rubbing with a dry cloth may scratch
the display. The display may be stained if splash or smear is
left attached to the surface. Wiping the product using alcohol,
thinner, benzine, detergent, etc. might erase the printing on
the outer casing or cause discoloration.
• Use as far away as possible from land-line phones, TVs,
radios, etc. Use nearby might affect them.
• The product may become warm while charging or during other
operations, depending on the situation, but this is not abnormal.
■ Main unit
• Do not forcefully press, tap or intentionally subject the display
to strong impact. Doing so might cause scratching or damage.
• Do not forcefully press your fingernails, sharp objects or hard
objects against keys or display surface. Doing so might cause
scratching or damage. The touch panel is designed to be
lightly touched by fingers. Do not apply strong pressure with
your fingers or sharp-pointed objects (such as fingernails,
ballpoint pens and pins) on the touch panel.
In the following cases, the product may not respond to
touching the touch panel, or errors in operation may occur.
• Operation with gloved hands
• Operation with fingernails
• Operation with a foreign object placed on the touch panel
• Operation with a protective sheet or sticker on the touch panel
• Operation with water drops or dew condensation attached
on the display
• Operation with wet or sweaty fingers
• Never use modified au phone. Use of a modified device
violates the Radio Law.
The product has acquired the certification of conformity with
technical regulations for the specified radio station based
on the Radio Law, and the "Technical Conformity Mark " is
indicated in this product.
How to confirm: Home screen → [基本フォルダ (Basic folder)] →
[Settings] → [About device] → [Regulatory information].
If the screws of the product are removed and modifications
are made to the internal components, the certification of
conformity with technical regulations will become invalid.
Never use the product without the valid certification. Doing so
violates the Radio Law.
• Take care not to place magnetized items such as magnetic
cards, speakers and TV sets near the product, as it might
cause malfunction. Putting a strong magnetism close to the
product might cause false operation.
• When you put the product in your pocket or bag, take care so
that the display does not come in contact with metal objects
or other hard objects, as it might cause scratching or damage.
• When suddenly brought into a warm place from a cold place,
or when in a humid location, or when used where temperature
suddenly changes (e.g. near the air discharge port of an air
conditioner), water droplets (i.e. condensation) sometimes are
formed inside the product. Note that when used under conditions
such as this, the humidity might cause corrosion or a fault.
• When wiping the display, wipe with a soft, dry cloth. Use of
a moistened cloth, glass cleaner or other similar liquid might
cause a fault.
• When connecting/disconnecting an external device to/from
the microUSB connection terminal or headset connection
terminal, make sure that the connector of the external device
is straight with the connector terminal.
• Note that applying unnecessary force with an external device
connected to the microUSB connection terminal or headset
connection terminal might cause damage.
• Do not cover the proximity/light sensor with your finger or
put a sticker on it. Doing so may hinder it from detecting the
ambient brightness and functioning correctly.
• Do not put a sticker, etc., on the proximity/light sensor. Doing
so may cause the sensor to malfunction and make the display
always turned off while receiving a call or during a call.
Summary of Contents for Galaxy S6 edge SCV31
Page 1: ...Basic Manual SCV31...
