manualshive.com logo in svg

ATX XDS-PRO Series, User Manual

Share
Download
ATX XDS-PRO Series User Manual Download Page 48

6-8 

XDS-PRO (PRO1R, PRO4R & PRO1S, PRO4S) Satellite Receivers - User Guide  Rev. A  R830001-2106

 

MONITOR AND CONTROL INTERFACE

ATX 

Confidential & Proprietary

MODE

[NONE/RLY/CUES/ALL]

Enable sources of relays: RLY=PrimaCue only, CUE=NetCues 

only, ALL=Both, PORT = mapped

Table 22: RLY Command

* - [0-31] only valid for PRO4R and PRO4S. Must use [0-15] for PRO1R and PRO1S.

SHUTDOWN Command:

 Fully shuts down the receiver.

SLEEP Command:

 Delay or pause a command (used for M&C scripting).  Syntax: 

SLEEP

 [msec].

STATIONS Command:

 Can also use 

STATION

, this command is used for station management. 

Option

Argument

Action

SHOW

Display stations that are currently mapped on the ports.

SCHED

Display station schedule

ROTATIONS

 [stationed],[pgm#]

Display all scheduled spots (insertions)

ROTATIONS,ADD

[LT],[stationed], [pgm#], [cue-

code], [[isci]…[isci]]

Table 23: STATIONS Command

TRACE Command:

 Used for diagnostic checks of the serial ports. Table 24 shows all 

TRACE

 options.

Option

Argument

Action

SHOW

Display all trace options.  *=live traces

ALL

Turn on all traces

NONE

Turn off all traces

Table 24: TRACE Command

TTY Command:

 Modem diagnostics command.  See Table 25 for usage.

Option

Argument

Action

[port],[0-2]

Open serial port (0=M&C, 1=NETCUE, 2=MODEM)

[port],[2400/9600/19200]

Set baud rate for specified port (8 data, no parity, 1 stop 

bit)

Table 25: TTY Command

TUNER Command:

 This command is used to view and modify all of the receiver’s tuner settings. Typing this command without 

any options will display a usage message. Type this command followed by one of these options/argument combinations to 

view or modify tuner settings:

Option

Argument

Action

[ENABLE/DISABLE]

Set receiver terrestrial mode

SHOW

Shows various technical data regarding the specified port.

SET

[kHz],[sps]

Sets the tuners radio frequency to [kHz] and the tuner’s 

symbol rate to [sps].

MODE

[DVB-S, DVB-S2-QPSK, DVB-

S2-8PSK]

Set Modulation mode

FBC

[kHz], [sps], [mode], [uplink_id]

Set fallback carrier parameters

LNB

[kHz]

Sets the tuner’s LNB offset to [kHz].

SR

[sps]

Sets the tuner’s symbol rate to [sps].

LNBV

[ON/OFF]

Sets LNBV to ON or OFF depending on argument.

CLEAR

Clears all tuner statistics.

SECOND

[0/1]

Second tuner disable/enable.

SPAN

[kHz]

How wide to allow tuner to search when looking

Table 26: TUNER Command

TUNER2 Command:

 Only valid for PRO receivers with 2 tuners.  See 

TUNER

 command for usage.

CHAPTER  7:     

Summary of Contents for XDS-PRO Series



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands