User’s Manual
34
Highlighting
Schedule On
and pressing the button toggles between On and Off. In the Schedule On mode, the
DVR records video based on the schedule established in the Schedule screen. When turning Schedule recording Off,
you will be asked to confirm your decision, and displays at the top-left corner of each camera screen. Panic recording
will function even when Schedule is turned off. displays during panic recording.
Highlight the
Schedule Mode
box and press the button. You can select
between Simple Mode
and
Advanced
Mode
. Selecting
Advanced Mode
allows you to set up individual recording schedule for each event.
NOTE: Changing the schedule mode will reset all event and action statuses.
Highlight the
+
and press the button to add a schedule item.
Highlight the box under the
Day
heading and press the button to change the days that the scheduled recording will
take place. Choose from:
Sun
,
Mon
,
Tue
,
Wed
,
Thu
,
Fri
,
Sat
,
M~F
,
Hol
and
All
.
Highlight the box under the
Range
heading and press the button to change the time range that the scheduled recording
will take place. The smallest time segment you can use is 15 minutes.
Highlight the box under the
Mode
heading and press the button to change the recording mode that will be used. Choose
from:
No Record
,
Time
,
Event
and
Time & Event
. (Simple Mode Only)
When the DVR is in the
No Record
mode, it will not record during the preset day and time range as long as the
PANIC
button is not pressed. Use the
No Record
mode when you do NOT want the DVR to record during certain times.
When the DVR is in the
Time
mode, the icon displays at the top-left corner of the screen. The DVR will record
and displays the icon at the top-left corner of the screen during the scheduled times.
When the DVR is in the
Event
mode, the red icon displays at the top-left corner of the screen. The DVR will record
and displays the icon at the top-left corner of the screen when any event occurs. When the DVR is in the
Pre-Event
recoding mode, the yellow icon displays when there is no event, and the DVR is not recording. When the DVR is
in the
Pre-Event
mode, the red and display when any event occurs and the DVR starts recoding.
When the DVR is in the
Time & Event
mode, the DVR will follow the Time settings and the icon displays at the
top-left corner of the screen. The DVR follows the Event settings and the icon displays.
Highlight the box under the
Channels
heading and press the button to select which cameras will be recorded. (Simple
Mode Only)
Highlight the box under the
Settings
heading
and press the button to define the recording settings.
You can set the ips, Quality and Resolution (ips, Quality,
Resolution and Dwell for Advanced Mode setup) of the
recording for any modes you set up in the Mode column. If
you do not set the ips, Quality, Resolution and Dwell in the
Settings column, the DVR will follow the default settings.
See below for details.
NOTE:
Descriptions of the Record icons in the Type
column are as follows:
Time-lapse (Time)
Alarm-In
Motion
Video Loss
Video Blind
Text-In
Figure 42 — Schedule – Settings (Advanced Mode) setup screen.
NOTE: Day, Range and Channels that are not defined will use the setting values of the previous schedule item.
When more than two schedule items are registered in the same day and time range, the DVR will follow the
latest registered schedule item.
When multiple events are detected at the same time from a specific channel, the DVR will record event
video with the high setting values if the ips, Quality, Resolution and Dwell values of events are different
from each other. However, the ips will be reset to the supported maximum value when the ips, Quality,
Resolution and Dwell are all set to the highest value. (Advanced Mode Only)
Summary of Contents for VLDVR Series
Page 1: ......
Page 9: ...User s Manual 2 Figure 1 Typical DVR installation...
