User’s Manual
14
The box beside
Version
displays the software version of the DVR. To upgrade the software, connect a USB device
containing the upgrade package file to the DVR. If you enabled the NetFS function (
Network
menu >
NetFS
tab),
you can download the file from the registered NetFS site. Highlight
Upgrade…
and press the button. Select
USB
Storage
or
NetFS
. If you select
NetFS
, select a NetFS site from the registered NetFS site list. The
Upgrade
screen
appears. The screen displays the upgrade package file names that are available. The “
.rui
” indicates that the file is for
software upgrades.
Select the desired file and press the button. Highlighting the
Install
button and pressing the button will install
the selected software package. Highlighting the
Cancel
button and pressing the button will close the window without
upgrading the software. If the upgrade package file is not installed on the DVR properly, you will get an error message.
The system restarts automatically after completing the upgrade.
CAUTION: The USB device must be FAT16 or FAT32 format.
You can import saved DVR settings or export the current DVR settings. To import saved DVR settings, connect the
USB device containing the setup file (.dat) to the DVR. If you enabled the NetFS function (
Network
menu >
NetFS
tab), you can download the setup file from the registered NetFS site. Highlight
Setup – Import…
and press the
button. Select
USB Storage
or
NetFS
. If you select
NetFS
, select a NetFS site from the registered NetFS site list.
Select the desired setup file and press the
Import
button to import the selected settings and change the DVR settings
accordingly. Highlight
Include Network Setup
and press the button to toggle between On and Off. When set to Off,
the network settings will not be changed.
To export the current DVR settings, connect the USB device to the DVR. If you enabled the NetFS function
(
Network
menu >
NetFS
tab), you can upload the setup file on the registered NetFS site. Highlight
Setup –
Export…
and press the button. Select
USB Storage
or
NetFS
. If you select
NetFS
, select a NetFS site from the
registered NetFS site list. Highlight the box beside
File name
and press the button. A virtual keyboard allows you
to enter the file name. Selecting
Export
will save the current settings in .dat file format on the USB device or the
NetFS site.
NOTE: Even after changing the DVR settings by importing saved settings, the time-related settings (Date/Time,
Time Zone and Daylight Saving Time) will NOT be changed.
CAUTION: The USB device must be FAT16 or FAT32 format.
