3.2. Access from the internet
Access from the internet once connected, the Network Camera is accessible on your local n
(LAN). To access the video encoder from the Internet you must configure your broa
etwork
dband router to
llow incoming data traffic to the video encoder. To do this, enable the NAT-traversal feature, which
coder. This is enabled
om Setup > System > Network > NAT.
.3 Setting the admin password over a secure connection
is
g, which is displayed when the network camera is accessed for the
tup at the first time. Enter your admin name and password, set by the administrator.
ote:
The default administrator username and password is “admin”. If the password is lost, the
etwork Camera must be reset to the factory default settings. See
“3.8 Resetting to the Factory
efault Settings” for more details.
o prevent network eavesdropping when setting the admin password, this can be done via an
w.
o set the password via an encrypted HTTPS connection, see “3.5.4 System > Security > HTTPS”.
fic between
a
will attempt to automatically configure the router to allow access to the video en
fr
For more information, please see “3.5.4 System>Network>NAT” of User’s Manual.
3
To gain access to the product, the password for the default administrator user must be set. This
done in the “Admin Password” dialo
se
N
N
D
T
encrypted HTTPS connection, which requires an HTTPS certificate (see note below).
To set the password via a standard HTTP connection, enter it directly in the first dialog shown belo
T
Note:
HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt the traf
web browsers and servers. The HTTPS certificate controls the encrypted exchange of information.
17
