3.8 Resetting to the factory default settings
To reset the Network Camera to the original factory settings, go to the Setup>System> Maintenance
eb page (described in “3.6.6 System > Maintenance”) or use the control button on the network
•
Button
ollow the instructions below to reset the Network Camera to the factory default settings using
e Rese
r finger while reconnecting
(SW1).
sets to factory defaults and restarts after completing the factory
reset.
e lens cover.
AUTION:
When performing a Factory Reset, you will lose any settings you have saved.
w
camera, as described below:
Using the Reset
F
th
t Button.
1. Switch off the Network Camera by disconnecting the power adapter.
2. Open the lens cover.
3. Press and hold the Control Button (SW1) on the board with you
the
power.
5.
Release
4. Keep the Control button (SW1) pressed during about 2 seconds.
the Control Button
6. The
network
camera
re
7. Close th
C
64
