ave a setting for sending and receiving an audio or video on a real-time basis. These settings are the
mber, and Time-To-Live value to use for the media stream(s) in multicast H.264
used for multicast streams. For more
formation, please see the online help.
oup.
-
RTP TTL:
Enter a value between 1 and 255. If a network status is smooth, enter a lower
alue. On the other hand, if a network status is poor, enter a higher value. When there are
many Network Cameras or users, a higher value may cause a heavy load to the network. For
a detailed setting, please consult with a network manager.
RTP
H
IP address, port nu
format. Only certain IP addresses and port numbers should be
in
•
Port Range
-
Start port:
Enter a value between 1024 and 65532
•
Multicast(Stream1/Stream2/Stream3)
This function is for sending Video and Audio to Multicast gr
-
Enable Multicast:
Check the box to enable multicast operation.
-
Multicast destination IP:
Enter an IP between 224.0.0.0 and 239.255.255.255. Although
it is empty, an IP will be entered automatically.
-
RTP port:
Enter a value between 1024 and 65532.
v
52
