6
RS-485 (IN and OUT)
The RS-485 S-Video connectors are used for remote control operations.
DC12V
The DC12V connection is the main power supply input for the multiplexer.
Setting for NTSC or PAL Operation
Upon initial setup, the multiplexer should be set to the NTSC or PAL configuration. When
changing the operation setting, all other unit settings return to the default configuration.
To set the multiplexer for NTSC operation:
1. Turn the power OFF.
2. Press and hold the ALARM and PLAYBACK buttons.
3. Turn
ON
the
power.
To set the multiplexer for PAL operation:
1. Turn the power OFF.
2. Press and hold the ALARM and MONITOR buttons.
3. Turn
ON
the
power.
