14
ATTO Technology Inc. FastStream SC RAID Controller Installation and Operation Manual
4
Click
Next
.
If a DHCP server is available on your network,
an address is assigned automatically by the
server. Note the assigned address:
_____________________________________
If you do not have a DHCP server, get an IP
address and subnet mask from your network
administrator, type it into the area provided, and
click on
Next
.
5
Click on
Launch Browser.
Your browser points to the ATTO ExpressNAV
splash screen. If you use Internet Explorer as a
browser, continue on to the optional
Beginning initial configuration
Setting up Internet Explorer
1
Open your browser.
2
Select
Internet Options
.
3
In the
Internet Options
screen, select the
Security
tab.
4
Click on the
Trusted Sites
icon.
5
Click on the
Sites
button.
6
In the text box
Add this Web site to the zone
,
add the IP address of the controller. You may
use wild cards.
7
Click on
Add.
8
Uncheck the
Require server verification
check box.
9
Click
OK.
10 At the bottom of the
Internet Options
box, click
on
OK
and close the box.
Beginning initial configuration
1
The ExpressNAV interface welcome screen
appears. Click on
Enter Here.
2
Type in the user name and password.
Note
The default values are user name
root
and
password
Password
. The user name is case
insensitive and the password is case sensitive.
It is best practice to change the default user
name and password. Refer to
3
The
Initial Setup
page appears. Continue to