11
5
Once the
Ready
prompt appears, type
ZMODEM RECEIVE
. The FibreBridge displays
that it is preparing to receive a file from your
terminal program.
6
On the terminal program, choose
Transfer
Send File
.
7
In the
Send File
box, enter the current
FibreBridge
.ima
file or click the browse button
to find it.
8
Click
Send
File. Wait approximately 35 minutes
for the transfer to complete.
9
The FibreBridge acknowledges receiving the
file and displays a message not to interrupt
power for 2 minutes wile the file is being written
to flash. Once the message “
ZMODEM
Transfer Complete
” is displayed with the
Ready prompt, type
firmwarerestart
.
Note
Until you issue
firmwarerestart
, the firmware
update is not complete.
10 It is highly recommended that you repeat the
firmware update process so that the backup
image is replaced with up-to-date firmware.
