42
Figure 4.19.
Contact angle measurement performed by picoliter dispenser. Picodispenser device control
includes the test drop buttom.The picoliter dispenser needs to be enabled from the recipe sheet.
4.3
Electrically heated temperature control unit
The Temperature Control Unit (TCU) for use with Theta is a computer controlled temperature control
unit. The TCU consists of an electronics control box and a sample compartment surrounded by a
ceramic insulator. Plug in the serial cable to be connected between the control unit and the Theta.
Connect
the serial cable to the port of the
control unit and then to the
Ext 1/0
(see Figure 4.1) port of
Theta interface unit with the cable supplied. The chamber is connected on the back of the temperature
control unit (see Figure 4.20). If temperature probe (TCP) is used, connect it on the back of the Theta to
the
Temp.
port.
Do not remove the ceramic lid or touch the environmental chamber when high temperatures (> 50
⁰
C) are
used due to the risk of burn injuries.
Summary of Contents for Theta
Page 1: ...Theta User manual OneAttension Optical Tensiometer Revision 1 0...
Page 3: ...6 3 Theory of surface free energy 65 7 TECHNICAL SPECIFICATIONS 70 8 CONTACT INFORMATION 71...
Page 41: ...38 Figure 4 15 Device controls and recipe sheet parameters for multiliquid dispenser...
Page 54: ...51 Figure 4 30 Analysis tab of the PD 200 experiment Figure 4 31 Calculated results...
