26
Figure 4.2.
Vertical dispenser movement.
If your Theta was purchased with the optional liquid dispenser with motorized vertical movement it will
arrive with the module already attached. Connect
the serial cable to the port of the
motorized liquid
dispenser holder (See Figure 4.3) and then to the
AUX1
port of Theta interface unit with the cable
supplied.
Figure 4.3.
The connection ports in the automatic dispenser movement/holder.
The first time after the experiment tab will be opened, the stage will initialize itself by driving to the top
end to properly establish its position. After this the stage will return to the zero position. Attention! Be
sure that nothing is on the sample stage and preferably lower the sample stage to ensure that no
accidents occur during homing.
In the experiment tab the software will automatically provide the device controls (Figure 4.4). Iin the
recipe sheet, speed of the movement, initialization and stroke dimensions can be adjusted.
Summary of Contents for Theta
Page 1: ...Theta User manual OneAttension Optical Tensiometer Revision 1 0...
Page 3: ...6 3 Theory of surface free energy 65 7 TECHNICAL SPECIFICATIONS 70 8 CONTACT INFORMATION 71...
Page 41: ...38 Figure 4 15 Device controls and recipe sheet parameters for multiliquid dispenser...
Page 54: ...51 Figure 4 30 Analysis tab of the PD 200 experiment Figure 4 31 Calculated results...
