Reset the dialog box:
Select the function using “ ” or “ ” and press
Enter to execute this function.
Used to exit from parameter setup and return to the
main interface.
All parameters changed will be stored upon exit, and
will apply.
System set
Factory Default
Exit
Mode
Net Address
Factory Default
Exit
Nor
1
Reset
Factory Default？
NO
YES
System set 〉Factory Default
System set 〉Exit
13
Keypad Tone
LCM Contrast
System set
ON
44
Nor
Mode
1
Net Address
Factory Default
LCM Contrast
System set
44
Nor
Mode
1
Net Address
Factory Default
Exit
System set
Net Address
Password
Keypad Tone
LCM Contrast
* * *
ON
Nor
4
1
4
Mode
Net Address
System set 〉Net Address
Used for communication among many machines and
can be connected to 255 devices at most:
Adjustment range: 1~255 (used for function extension).
The factory default is: 1.
(The function has not been open)
Used to restore system parameters to factory default.
After the factory default is restored through click
confirmation, all system parameters will be restored to
factory default.
