Used to set the system language:
Short press the “MENU” key to enter the language option;
Press “ ” or “ ” to switch the language.
EN: English.
CN: Chinese.
After selecting the required language, short press the
“MENU” key to confirm it.
The factory default is: Chinese.
Languages
Unit
Password
Keypad Tone
LCM Contrast
System set
En
C
* * *
ON
4 4
Languages
Unit
Password
Keypad Tone
LCM Contrast
System set
En
C
* * *
ON
4 4
Languages
Unit
Password
Keypad Tone
LCM Contrast
System set
En
C
* * *
ON
4 4
In any setup mode, press the key “3” to enter the function / curve setup page;
press the key “2” to enter the system setup page.
Languages
System set
〉
Languages
Unit
Password
Mode
Net Address
Factory Default
Exit
System set
Nor
1
Host system setup parameters
System set
〉
Unit
System set
〉
Password
11
Mode
: Used to define the Host communication (not
available yet).
Net Address
: Local communication address defined
during networking operation (not available yet).
Factory Default
: Used to resume the Host to the
factory settings.
Exit
: Press to exit the parameter setup to return to
the main interface.
Used to set the system temperature unit:
℃: Celsius.
℉
: Fahrenheit.
The factory default is: ℃.
1. Used to lock the system and protect set
parameters of the system from being changed
by unauthorized person.
2. Coordinate with the fixed temperature of
parameter setup of the function, lock the
temperature of the whole equipment and
control the welding process.
The factory default is: OFF.
