ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 128 / 366

116 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
Controls and Connections
Connections
This section describes the following SuperTrak conveyance platform connections:
• Straight Section to Straight Section Connections on page 116
• Straight Section to 180 Deg. Section Connections on page 116
• 180 Deg. Section (500 mm) to SuperTrak Control Panel Connection on page
116
• Ethernet Port Connection on page 117
• Main Power Connection on page 118
• Safety Circuit Connection on page 119
• PLC Connection on page 120
• Ethernet POWERLINK Connection on page 121
• Gateway Network Connections on page 122
Straight Section to Straight Section Connections
See Replace an Electrical Interconnect on page 176.
Straight Section to 180 Deg. Section Connections
See If required, remove the existing electrical interconnect as described above. on
page 177.
180 Deg. Section (500 mm) to SuperTrak Control Panel
Connection
See Install an Electrical Interconnect Between a Curved Section and a SuperTrak
Control Panel on page 179.
Connection information provided in this section is based on the use of the
ATS SuperTrak control panel. The control panel meets UL certification and
product testing. If an alternate electrical panel is used, it must meet the
guidelines defined in the
SuperTrak GEN3 Design Considerations
document.