ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 134 / 366

122 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
Controls and Connections
Gateway Network Connections
The gateway network connections use Ethernet cables to connect an array of
gateway boards to the controller.
Left and Right Gateway Networks
The SuperTrak conveyance platform is divided into two (2) networks: the left
network, and the right network. Each network begins with a cable that is routed
through the control panel electrical interconnect to the controller.
Turn OFF the 24 V gateway power, and turn OFF the controller before
connecting the gateway network.
Although the gateway network connections are implemented using
standard Ethernet cables, it is not an Ethernet network and should not be
connected to Ethernet devices.
ID Connection Type Description
A
N/A Right gateway network.
B
N/A Control panel electrical interconnect. Left and right gateway network
cables route to the control panel through a flexible conduit.
C
N/A Left gateway network.
D
RJ45 Right gateway network Ethernet cable.
E
RJ45 Left gateway network Ethernet cable.
F
N/A Left and right gateway network connection locations.