MAN - Pyrolytic Oven - REV: Original | H. Maintenance
34
b. Empty the catch tray in the bottom of the oven (into floor sweeps).
6. Clean Electronics Cabinet
a. Vacuum out any areas in the electronics cabinet that appear dirty.
Every Twelve Months
Perform the 6 month steps, plus:
1. Replace catalyst trays
a. Discard the old trays containing the catalyst and replace them with a new ones.
b. Order replacement catalyst trays.
H.7 Spare Parts List
The following should be kept on hand for regular maintenance:
• Tray, Stainless Steel, Catalytic, QTY 1
• Thermocouple, Oven Control Type K, QTY 1
• Thermocouple, Oven Hi-Limit Type K, QTY 1
• Thermocouple, Oxidizer Control, Type K, ¼” by 6” long, 36” leads, QTY 1
• Gasket, Door Replacement, Hi-Temp, QTY 1**
Part No.
D
escription
XXXXXXX
Gasket, Door Replacement, Hi-Temp, 78”
XXXXXXX
Gasket, Door Replacement, Silicone, 88”
XXXXXXX
Thermocouple, Oven Type K
XXXXXXX
Heater Elements, Model 3 Oven
Part No.
Afterburner (Oxidizer) Parts
XXXXXXX
Heater Element, 1060 watts (uses 2)
XXXXXXX
Catalyst, Ceramic Honeycomb, 5” Dia by 2”
Summary of Contents for Pyro-Clean
