21 / 26
A Set Interval
User can define data saving interval on SD card using
this menu. Set Interval can be of (One Minute, Five
Minutes, Thirty Minutes, One Hour, Twelve Hours).
Factory defined interval for data saving is One
Minute.
Menu Button Insert Password Downward
Button SD Card Setting Enter Button
Set Interval
B Save Data
User can define data saving interval on SD card using
this menu. Pressing enter button will select and
unselect the save data option.
Menu Button Insert Password Downward
Button SD Card Setting Enter Button
Save data
7.1.6 Select Units
ATS-LV 1000 has a built-
in customized unit’s option.
User can define its desired units in terms of SI and IPS.
Menu Button Insert Password Downward
Button SD Card Setting
User can select any units from following:
CUBIC METER, LITRE, GALLON
7.1.7 Device ID
ATS-LV 1000 contains device ID option. Device ID is
used for communication between Level Controller
and Level Controller Software. This communication is
based on RS485.
Menu Button Insert Password Downward
Button Device ID
User can select any device ID up to 999999 and this same device ID will be required to put in
software. Multiple device IDs can connect to a single software. Use upward and forward
button to change digits from 0-9 and switch between digits.
